TOWN OF EMMITSBURG
EMMITSBURG WWTP ENR UPGRADE
CONTRACT NO. 2011-5-1651
ADDENDUM NO. 1
April 25, 2012

To All Document Holders:

This Addendum No. 1 is hereby made a part of the Contract Documents on which the Contract will be based, and is issued to modify, explain and/or correct the original Contract Documents. Please attach this Addendum to your Contract Documents and submit bids and be otherwise governed accordingly. Receipt of this Addendum must be acknowledged on Page 00410-2 of the Bid Form.

CHANGES TO CONTRACT SPECIFICATIONS:

1. Section 00800 Paragraph SC-6.05.C.1; for the sentence “Request for Engineer‟s clarification of materials and equipment considered „or-equal‟ prior to the Bid Date must be received no later than 14 days prior to the date for receipt of Bids,” REPLACE the number “14” with the word “five”

2. Section 00800 Paragraph SC-6.05.C.1; for the sentence “No item of material or equipment will be considered by Engineer as a substitute unless written request for approval has been submitted by Bidder and has been received by Engineer at least 14 days prior to the receipt of Bids,” REPLACE the number “14” with the number “15”

3. Section 01010, Paragraph 1.06.B.9; REPLACE each instance of the word “Biolac” with the words “Phased Aeration Lagoons”

4. Section 01039 Paragraph 1.07.A, ADD the phrase “(or another approved software as required)” after the phrase “World Wide Web,”

5. Section 01300, Paragraph 1.02.A; REPLACE the number “010139” with the number “01039”

6. Section 01310, Paragraph 1.03.A; DELETE this paragraph in its entirety.

7. Section 01310, Paragraph 1.11.B; DELETE the sentence “Furthermore, Owner has the right to withhold progress payments until such time as Contractor‟s progress is brought into compliance with Progress Schedule.”

8. Section 01500, Paragraph 1.23.C.1; REPLACE the phrase “Dell or equal.” with the phrase “Dell, HP, or equal.”

9. Section 01500, Paragraph 1.23.C.2; REPLACE the phrase “HP or equal.” with the phrase “Dell, HP, or equal.”

10. Section 01640, Paragraph 1.07.A; REPLACE the phrase “Alemite #1600 Series or Lincoln” with the phrase “Alemite #1600 Series, Lincoln, or equal”

11. Section 01640, Paragraph 1.11.C.5; DELETE the phrase “similar to File Pocket No. 74CG (9-1/2 inches by 14-3/4 inches) as manufactured by the Cooke and Cobb Company, or equal”

12. Section 02246, Paragraph 2.02.A; ADD part 4 as follows: “4. Or equal.”

13. Section 02246, Paragraph 2.03.A.1; ADD part d as follows: “d. Or equal.”

14. Section 02270, Paragraph 1.05.A.1; REPLACE the sentence “A list documenting no less than 10 completed facilities totaling a minimum of 20,000,000 square feet for which the manufacturer has manufactured geomembranes,” with the sentence “A list documenting the number of completed facilities for which the manufacturer has manufactured geomembranes, including an approximate total for the square feet of geomembrane installed.”

15. Section 02270, Paragraph 1.05.A.2.a; REPLACE the sentence “A list documenting at least 10 completed facilities for which the Installer has completed the installation of a geomembrane totaling a minimum of 2,000,000 square feet,” with the sentence “A list documenting the number of completed facilities for which the Installer has completed the installation of a geomembrane, including the total square feet of geomembrane installed per facility.”

16. Section 02270, Paragraph 1.05.A.3; DELETE the phrase “a minimum of 1,000,000 lbs. of”

17. Section 02270, Paragraph 1.05.B.2.a; DELETE the phrases “a minimum of 1,000,000 square feet of” and “a minimum of 500,000 square feet of”

18. Section 02270, Paragraph 1.05.B.2.b; DELETE the phrases “a minimum of 600,000 square feet of” and “a minimum of 400,000 square feet of”

19. Section 02270, Paragraph 1.05.B.2.c; DELETE the phrases “a minimum of 500,000 square feet of” and “a minimum of 200,000 square feet of”

20. Section 02661, Paragraph 3.06.C; DELETE the phrase “Smith Blair Model 441, or equal”

21. Section 02662, Paragraph 2.10.C; REPLACE the phrase “or equal” with the phrase “, Kennedy Valve, or equal.”

22. Section 02662, Paragraph 2.11.E; DELETE this paragraph.

23. Section 02662, Paragraph 2.11.F; DELETE the phrase “a minimum of five years”

24. Section 02698, Paragraph 2.02.A.6.n; DELETE this paragraph.

25. Section 02698, Paragraph 2.02.A.6.p; DELETE this paragraph.

26. Section 02698, Paragraph 2.02.D.1; REPLACE this paragraph with the following:
“q. Manufacturer shall be Franklin Fueling Systems, OPW, or equal.”

27. Section 02698, Paragraph 2.02.F.1.b; DELETE the sentence “Restraints for push-on joints shall be Series 1600 and restraints for mechanical joints shall be Series 2000PV as manufactured by EBAA Iron, Inc., or equal.”

28. Section 02698, Paragraph 2.02.F.2.b; DELETE the sentence “Restraints for push-on joints shall be Series 1600 and restraints for mechanical joints shall be Series 2000PV as manufactured by EBAA Iron, Inc., or equal.”

29. Section 02698, Paragraph 2.03.B; DELETE the phrase “the seal shall be a link seal manufactured by Thunderline Corporation, Wanye, MI or equal.”

30. Section 02698, Paragraph 2.04.B.1.b.2; DELETE the sentence “Manufacturer of Isolation Flange – Barlow Corporation, or equal.”

31. Section 02698, Paragraph 2.04.B.1.b.3; DELETE the phrase “, as manufactured by PSG Corrosion Engineering, Inc., or equal”

32. Section 02698, Paragraph 3.06.A; DELETE the phrase “, Smith Blair Model 441, or equal”

33. Section 03250, Paragraph 2.02.B.2; DELETE the end of this sentence that reads "such as Conflex LT by Masonite Corporation Building Products or equal"

34. Section 03300, Paragraph 1.04.H; DELETE the words "minimum 10 year"

35. Section 03300, Paragraph 2.02.B.5; DELETE the last sentence that reads "Use NewCem by Blue Circle Atlantic, Inc. or equal."

36. Section 03350, Paragraph 2.01.B; DELETE the last sentence that reads "Manufacturer shall provide a minimum 10-year written warranty."

37. Section 03481, Paragraph 2.07.C; DELETE the end of this sentence that reads "such as Link Seal or equal".

38. Section 03481, Paragraph 2.11.A; DELETE this sentence and REPLACE with the following: "Around the exterior of all wall joints, apply a primer and membrane type waterproofing system."

39. Section 03482, Paragraph 1.07.A; DELETE the phrase "a minimum of 10 years"

40. Section 03482, Paragraph 1.08.A; in the first sentence, DELETE the phrase "10-year". DELETE the end of the last sentence that reads "within 10 years of the installation date".

41. Section 03482, Paragraph 2.01; DELETE this paragraph in its entirety.

42. Section 03482, Paragraph 2.04.A; DELETE the last sentence that reads "Use Sika Sikaflex 1A or equal."

43. Section 03482, Paragraph 2.07.B.2; DELETE this paragraph in its entirety.

44. Section 04300, Paragraph 1.04.F; ADD “2.06” in the blank space provided.

45. Section 04300, Paragraph 1.12.A; ADD “1.02” in the blank space provided.

46. Section 05400, Paragraph 1.06.A; DELETE the end of this sentence that reads "for a minimum of three years"

47. Section 05531, Paragraph 2.01.C.1; DELETE the product sub designation "HX"

48. Section 05531, Paragraph 2.01.C.2; ADD Pattern No. "4529, Type 3"

49. • Section 06112, Paragraph 2.02.C.2; ADD the phrase “, Nudo Fiber-Lite,” in front of the phrase “or equal.”

50. • Section 06640, Paragraph 2.01.A; DELETE the phrase “Basis of Design –“

51. • Section 06640, Paragraph 2.01; CHANGE paragraph C to paragraph D. Change Paragraph B to paragraph C.

52. Section 06640, Paragraph 2.01; ADD pargraph B as follows:
“B. Enduro Tuff-Span 7.2 x 1.5” Profile.”

53. Section 07311, Paragraph 2.01.H; ADD the phrase “Landmark Pro By CertainTeed,” before the phrase “or equal.”

54. Section 07311, Paragraph 2.02.B; ADD the phrase “CertainTeed WinterGuard,” before the phrase “or equal.”

55. Section 07631, Paragraph 2.01.A; REPLACE this paragraph as follows:
“A. Hickman – OGEE style gutters and downspouts.”

56. Section 07631, Paragraph 2.01.B; REPLACE this paragraph as follows:
“B. Metal-ERA – OGEE style gutters and downspouts.”

57. Section 07631, Paragraph 2.01; DELETE both parts titled “C” in their entirety.

58. Section 07631, Paragraph 2.01.C; ADD this paragraph as follows:
“C. Or equal.”

59. Section 07840, Paragraph 1.06.E; ADD this paragraph as follows:

60. “E. Firestopping Schedule: List each type of firestopping product submitted in a table format with the product system designation opposite a list of the locations where it is proposed for use.”

61. Section 07840, Paragraph 2.04.A.1; DELETE this paragraph in its entirety.

62. Section 07840, Paragraph 2.04.B.1; DELETE this paragraph in its entirety.

63. Section 07840, Paragraph 2.04.C.1; DELETE this paragraph in its entirety.

64. Section 07840, Paragraph 2.04.D.1; DELETE this paragraph in its entirety.

65. Section 07840, Paragraph 2.04.E.1; DELETE this paragraph in its entirety.

66. Section 07840, Paragraph 2.04.F.1.a; DELETE this paragraph in its entirety.

67. Section 07840, Paragraph 2.04.F.2.a; DELETE this paragraph in its entirety.

68. Section 07840, Paragraph 2.04.G.1; DELETE this paragraph in its entirety.

69. Section 07840, Paragraph 2.04.H.1; DELETE this paragraph in its entirety.

70. Section 07840, Paragraph 2.04.I.1; DELETE this paragraph in its entirety.

71. Section 07840, Paragraph 2.04.J.1; DELETE this paragraph in its entirety.

72. Section 07840, Paragraph 2.04.K.1; DELETE this paragraph in its entirety.

73. Section 07840, Paragraph 2.04.L.1; DELETE this paragraph in its entirety.

74. Section 07840, Paragraph 2.04.M.1; DELETE this paragraph in its entirety.

75. Section 07840, Paragraph 2.04.N.1; DELETE this paragraph in its entirety.

76. Section 07900, Paragraph 2.02.E; REPLACE the phrase “equal to Sika „Sika Boom,” with the phrase “; Sika “Sika Boom”, Honeywell “Enovate” or equal.”

77. Section 08520, Paragraph 1.01.D; ADD this paragraph as follows:
“D. Heavy Commercial Grade F-HC100”

78. Section 08520, 1.03 References REPLACE the table with the following:
AAMA 2605 Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels ASTM B209
Aluminum and Aluminum-Alloy Sheet and Plate ASTM B221 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

79. Section 08520, Paragraph 1.03.A; ADD this paragraph below the table as follows
“A. ANSI/AAMS/NWWDA 101/I.S. 97/NAFSI”

80. Section 08520, Paragraph 1.05.E; DELETE this paragraph in its entirety.

81. Section 08520, Paragraph 1.05.F; DELETE this paragraph in its entirety.

82. Section 08520, Paragraph 1.05.G; DELETE this paragraph in its entirety.

83. Section 08520, Paragraph 1.05.H; REPLACE this pharagraph with the following:
“H. Condensation resistance test (CRF) shall not be less than 58; ANSI/AAMS/NWWDA 101/I.S. 97/NAFSI

84. Section 08520, Paragraph 1.05.J; DELETE this paragraph in its entirety.

85. Section 08520, Paragraph 2.01.A.1; REPLACE the number “8430TL” with the number “8410TL”

86. Section 08520, Paragraph 2.01.A.2; REPLACE with the following;
“2. EFCO – Product Series 6750 Fixed”

87. Section 08520, Paragraph 2.01.A.3; REPLACE this paragraph with the following:
“3. Or equal.”

88. Section 08710, Paragraph 2.03.A.1; ADD the phrase “, or equal” after the phrase “Pemko 252x3AFG”

89. Section 08710, Paragraph 2.03.A.3; ADD the phrase “, or equal” after the phrase “Pemko 252A”

90. Section 08710, Paragraph 2.03.B.1; ADD the phrase “, or equal” after the phrase “Stanley FBB199-US32D”

91. Section 08800, Paragraph 1.07.C.1; DELETE the phrase “minimum five years”

92. Section 08800, Paragraph 1.07.C.2; DELETE the phrase “minimum five years”

93. Section 08800, Paragraph 1.07.C.3; DELETE the phrase “minimum five years”

94. Section 09260, Paragraph 2.01.D REPLACE this paragraph with the following:
“D. Or equal.”

95. Section 09511, Paragraph 1.06.A; DELETE the phrase “minimum 10 years”

96. Section 09511, Paragraph 2.01.A; ADD this paragraph under the table as follows:
“A. Or equal.”

97. Section 09511, Paragraph 2.03.A; ADD this paragraph under the table as follows:
“A. Or equal.”

98. Section 09800, Paragraph 2.01.A; DELETE the phrase “system submitted under Section 01300, Submittals, requirements and approved by the Engineer.”

99. Section 09851, Paragraph 1.06.A; DELETE the phrase "minimum five years".

100. Section 09851, Paragraph 1.06.B; DELETE the phrase "minimum five years‟" and the subsequent occurrence of the word "five"

101. Section 09900, Paragraph 2.01.E; ADD the phrase “, or equal.” after the phrase “EMED Company, Inc.”

102. Section 09900, Table A-1; ADD the following statement underneath the heading “Coating System Schedule;”

103. “Only two manufactures are listed in these tables for clarity. Acceptable manufactures are not limited to those listed in this table. Refer to Article 2.01 of this Section for details regarding acceptable manufacturers.”

104. Section 11207, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

105. Section 11285, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

106. Section 11285, Paragraph 3.01.E; REPLACE “.” with “, or equal.”

107. Section 11288, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

108. Section 11288, Paragraph 3.01.E; REPLACE this paragraph with the following:
“E. Install covers with a minimum slope of 1/4” per foot to allow precipitation or hosedown water to drain into the clarifier.”

109. Section 11288, Paragraph 3.01.H; DELETE the phrase “HILTI-style”

110. Section 11288, Paragraph 3.01.I; REPLACE “.” with “, or equal.”

111. Section 11290, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

112. Section 11291, Paragraph 2.01.B.2; REPLACE the phrase “or equal” with the phrase “Auma Actuators, Inc.”

113. Section 11291, Paragraph 2.01.B; ADD subparagraph 3 as follows:
“3. Or equal.”

114. Section 11291, Paragraph 2.05.A.3.e; DELETE this paragraph.

115. Section 11291, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

116. Section 11291, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

117. Section 11302, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

118. Section 11302, Paragraph 2.04.C.5; REPLACE this paragraph with the following:
“5. Air release valve shall have an inlet diameter of one inch.”

119. Section 11302, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

120. Section 11302, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

121. Section 11303, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

122. Section 11303, Paragraph 3.01.F; REPLACE “.” with “, or equal.”

123. Section 11307, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

124. Section 11307, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

125. Section 11309, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

126. Section 11309, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

127. Section 11309, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

128. Section 11310, Paragraph 2.01; DELETE this paragraph in its entirety.

129. Section 11310, Paragraph 2.02.A; DELETE the phrases “In the case of an “or-equal” or a substitution,” and “for a minimum period of five years”

130. Section 11310, Paragraph 2.02.B; DELETE the sentence “Manufacturer must have at least twenty (20) similar installations currently in operation and shall submit evidence of manufacturing experience and installations upon request.”

131. Section 11310, Paragraph 2.04.A.7; DELETE this paragraph in its entirety.

132. Section 11310, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

133. Section 11310, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

134. Section 11312, Paragraph 2.01.A.2; REPLACE “Or equal.” with “Franklin Miller, Inc.;”

135. Section 11312, Paragraph 2.01.A.3; ADD this paragraph as follows:
“3. Or equal.”

136. Section 11312, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

137. Section 11312, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

138. Section 11312, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

139. Section 11316, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

140. Section 11316, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

141. Section 11316, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

142. Section 11333, Paragraph 2.02.A; REPLACE “mechanical screens” with “sanitary wastewater service” and DELETE the phrase “for a minimum period of five years”

143. Section 11333, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

144. Section 11333, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

145. Section 11334, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

146. Section 11334, Paragraph 2.01.B; REPLACE this paragraph with the following:
“B. The grit removal system manufacturer shall be:
1. Smith & Loveless
2. Ovivo
3. Or equal.”

147. Section 11334, Paragraph 2.01.C; DELETE this paragraph in its entirety.

148. Section 11334, Paragraph 2.03.B.1; DELETE this paragraph in its entirety.

149. Section 11334, Paragraph 2.03.B.11; REPLACE the phrase “be Smith and Loveless Turbo Pista Grit Pumps Model 4B2H with recessed impeller” with the phrase “meet the following requirements:”

150. Section 11334, Paragraph 2.03.C.1; DELETE this paragraph in its entirety.

151. Section 11334, Paragraph 2.03.B.10.c.8); REPLACE the word “OEPRATE” with the word “OPERATE”

152. Section 11334, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

153. Section 11334, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

154. Section 11335, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

155. Section 11335, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

156. Section 11335, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

157. Section 11345, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

158. Section 11345, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

159. Section 11345, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

160. Section 11346, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

161. Section 11346, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

162. Section 11346, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

163. Section 11347, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

164. Section 11347, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

165. Section 11347, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

166. Section 11348, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

167. Section 11348, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

168. Section 11348, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

169. Section 11350, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

170. Section 11350, Paragraph 2.03.H.2; DELETE the sentence “The heating panels shall be Model ELP as manufactured by HotFoil-EHS or equal.”

171. Section 11350, Paragraph 2.03.H.3; DELETE the sentence “The thermostat shall be Model E55 as manufactured by United Electric or equal.”

172. Section 11350, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

173. Section 11350, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

174. Section 11360, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

175. Section 11360, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

176. Section 11360, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

177. Section 11371, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

178. Section 11371, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

179. Section 11371, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

180. Section 11373, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

181. Section 11373, Paragraph 2.03.B.4.b; DELETE the phrase “by Piel America, or equal”

182. Section 11373, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

183. Section 11373, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

184. Section 11380, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

185. Section 11380, Paragraph 2.04.A.2; DELETE the sentence “The stated air flow is based upon the Parkson design.”

186. Section 11380, Paragraph 2.06.D; REPLACE the phrase “A ChemScan® or WTW unit” with the phrase “A unit by ChemScan, WTW, or equal”

187. Section 11380, Paragraph 2.06.E; REPLACE the phrase “A ChemScan® or WTW unit” with the phrase “A unit by ChemScan, WTW, or equal”

188. Section 11380, Paragraph 2.06.G; DELETE the sentence “All probes shall be by Hach or equal.”

189. Section 11380, Paragraph 2.06.G.2; DELETE the sentence “Polypropylene shall be manufactured by Harrington Plastics or equal.”

190. Section 11380, Paragraph 2.06H.6; DELETE the “®” symbol.

191. Section 11380, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

192. Section 11380, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

193. Section 11385, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

194. Section 11385, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

195. Section 11385, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

196. Section 11390, Paragraph 2.02.A; REPLACE “UV disinfection” with “sanitary wastewater service” and DELETE the phrase “for a minimum period of five years”

197. Section 11390, Paragraph 2.03.C.6; DELETE the phrase “, as manufactured by General Electric, or equal”

198. Section 11390, Paragraph 2.04.D.1; REPLACE the phrase “three (2)” with the phrase “three (3)”

199. Section 11390, Paragraph 2.04.D.7; REPLACE this paragraph in its entirety with the following:  “7. Davit crane and bases shall be provided in accordance with Section 14602, Hoists and Cranes.”

200. Section 11390, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

201. Section 11399, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

202. Section 11399, Paragraph 3.01.F; REPLACE “.” with “, or equal.”

203. Section 11450, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

204. Section 11450, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

205. Section 11450, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

206. Section 11500, Paragraph 2.01.A; DELETE this paragraph in its entirety.

207. Section 11500, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

208. Section 11500, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

209. Section 11500, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

210. Section 11500, Paragraph 3.04; on pages 11500-17 through 19, REPLACE all instances of the word “Parkson” with the word “Manufacturer”

211. Section 11500, Paragraph 3.04; on page 11500-20, DELETE the paragraph with the heading “Governing Law & Venue:” in its entirety.

212. Section 11501, Paragraph 2.01.E.3; DELETE this paragraph in its entirety.

213. Section 11501, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

214. Section 11501, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

215. Section 11605, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

216. Section 11605, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

217. Section 12600, Paragraph 2.01; DELETE parts titled “B” and “C” in their entirety.

218. Section 12600, Paragraph 2.02.B.4; DELETE this paragraph in its entirety.

219. Section 12600, Paragraph 3.06.A; ADD this paragraph below the table as follows:
“A. Or equal.”

220. Section 13200, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

221. Section 13200, Paragraph 2.03.C; DELETE the phrase “Fireguard® manufacturing” with the word “manufacturers”

222. Section 13200, Paragraph 2.04.E; DELETE the phrase “, OPW Model 92-0044 or approved equal”

223. Section 13200, Paragraph 2.04.I.1; DELETE parts a. and b. of this paragraph

224. Section 13200, Paragraph 2.04.O; DELETE the sentence “Manhole shall be APT Model TSD-4736-IP by Franklin Fueling Systems of Madison, WI or approved equal.”

225. Section 13200, Paragraph 2.04.P; DELETE the sentence “Frame and cover shall be Pemco Model 106-36x10, or approved equal.”

226. Section 13200, Paragraph 2.04.R; DELETE part 1 of this paragraph.

227. Section 13200, Paragraph 2.04.T.2; DELETE the sentence “Clamp shall be G40 series by Lind Equipment Ltd. Of Markham, Ontario or approved equal.”

228. Section 13200, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

229. Section 13200, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

230. Section 13205, Paragraph 2.02.A; DELETE the phrase “for a minimum period of five years”

231. Section 13205, Paragraph 2.03.F; DELETE this paragraph in its entirety.

232. Section 13205, Paragraph 3.01.G; DELETE the phrase “HILTI-style”

233. Section 13205, Paragraph 3.01.H; REPLACE “.” with “, or equal.”

234. Section 14602, Paragraph 2.01.C; DELETE this paragraph in its entirety.

235. Section 14602, Paragraph 2.02.C.1.f; DELETE the sentence “Provide Thern model M4312PBSS or equal.”

236. Section 14602, Paragraph 2.03.D; DELETE this paragraph in its entirety.

237. Section 14602, Paragraph 2.03.E; DELETE this paragraph in its entirety.

238. Section 15060, Paragraph 2.02.E.2.n; DELETE this paragraph in its entirety.

239. Section 15060, Paragraph 2.03.B.6; DELETE the sentence “Guards shall be TFE VUE-Gards by RAMCO Manufacturing Co., Inc., Kenilworth, NJ, or equal.”

240. Section 15060, Paragraph 2.03.B.7; DELETE the phrase “and shall be manufactured by IPS, Part No. 724, or equal.”

241. Section 15060, Paragraph 2.04.I.2; DELETE the phrase “and shall be equal to “Style 38” steel couplings for plain end steel pipe manufactured by the Dresser Manufacturing Company, or equal”

242. Section 15060, Paragraph 2.10.A.8; DELETE the sentence “The seal shall be “Link-Seal,” as manufactured by the Thunderline Corporation, Wayne, MI; or equal.”

243. Section 15060, Paragraph 3.08.B; ADD the phrase “or equal” to the end of the first sentence.

244. Section 15100, Paragraph 2.05.G; DELETE this paragraph in its entirety.

245. Section 15100, Paragraph 2.05.I; DELETE the sentence “These check valves shall be Golden Anderson Model 250-D or equal.”

246. Section 15100, Paragraph 2.06.E; DELETE this paragraph in its entirety.

247. Section 15100, Paragraph 2.09.E; DELETE this paragraph in its entirety.

248. Section 15100, Paragraph 2.17.D; DELETE this paragraph in its entirety.

249. Section 15100, Paragraph 2.18.K; DELETE this paragraph in its entirety.

250. Section 15100, Paragraph 2.25.C; DELETE this paragraph in its entirety.

251. Section 15170, Paragraph 1.08.A.4; DELETE this paragraph in its entirety.

252. Section 15260, Paragraph 2.03.D.1; ADD the phrase ", Corrosion Control Products Company, Tapecoat" in front of the words “or equal.”

253. Section 15260; CHANGE Paragraph 2.04.A.3 to read "or equal".

254. Section 15410, Paragraph 2.04.A; ADD the phrase ", Hammond Valve Company," in front of the words “or equal.”

255. Section 15430, Paragraph 2.07.A; ADD the phrase ", Murray Equipment, Inc.,” in front of the phrase “or equal.”

256. Section 15440, Paragraph 2.02.C.1; DELETE the sentence "American Standard Water Saver Afwall 2257.103, or equal"

257. Section 15440, Paragraph 2.02.D.2; DELETE the phrase "as manufactured by American Standard 0355.012 or equal."

258. Section 15440, Paragraph 2.04.A.2; DELETE the sentence "The explosion proof water heater shall be Lochinvar Model RTA040K or equal."

259. Section 15835, Paragraph 2.03.A; DELETE this paragraph in its entirety.

260. Section 15855, Paragraph 2.01.B; DELETE this paragraph in its entirety.

261. Section 15865, Paragraph 2.01.A; DELETE this paragraph in its entirety.

262. Section 15940, Paragraph 2.01.B.6; DELETE this paragraph in its entirety.

263. Section 15940, Paragraph 2.01.D.6; DELETE this paragraph in its entirety.

264. Section 15940, Paragraph 2.02.D.6; DELETE this paragraph in its entirety.

265. Section 15940, Paragraph 2.03.A; DELETE this paragraph in its entirety.

266. Section 16470, Paragraph 2.02.F; DELETE this paragraph in its entirety.

267. Section 16470, Paragraph 2.03.C; DELETE this paragraph in its entirety.

268. Section 16480, Paragraph 1.06.A; REPLACE the phrase “minimum 10 years‟” with the word “sufficient”

269. Section 16480, Paragraph 1.06.B; REPLACE the phrase “300 miles” with the phrase “a reasonable distance”

270. Section 16484, Paragraph 1.07.A; REPLACE the phrase “minimum 10 years‟” with the word “sufficient”

271. Section 16486, Paragraph 1.07.A; REPLACE the phrase “minimum 10 years‟” with the word “sufficient”

272. Section 16620, Paragraph 1.08.A; REPLACE the phrase “minimum 10 years‟” with the word “sufficient”

273. Section 16620, Paragraph 1.08.A; REPLACE the phrase “150 miles” with the phrase “a reasonable distance”

274. Section 16620, Paragraph 1.08.B; REPLACE the phrase “minimum 10 years‟” with the word “sufficient”

275. Section 16620, Paragraph 2.05.K; ADD the phrase “, Edwards Signal,” after each instance of the phrase “Federal Signal Corporation”

276. Section 16721, Paragraph 1.07.A; REPLACE the phrase “minimum 10 years‟” with the word “sufficient”

277. Section 16721, Paragraph 1.07.A; REPLACE the phrase “100 miles” with the phrase “a reasonable distance”

278. Section 16721, Paragraph 1.07.B; REPLACE the phrase “minimum 10 years‟” with the word “sufficient”

279. Section 16721, Paragraph 2.03.A; DELETE the phrase “Model GW-FCI 7100 as manufactured by Gamewell-FCI or equal.”

280. Section 16721, Paragraph 2.03.D.1; DELETE the sentence “Model MS-7AF with Blackbox or equal.”

281. Section 16721, Paragraph 2.03.D.2; DELETE the sentence “Model MPEX or equal.”

282. Section 16721, Paragraph 2.03.D.3; DELETE the sentence “Model MS-7LOB or equal.”

283. Section 16721, Paragraph 2.03.D.4; DELETE the sentence “Model ASD-PTL2F with Model ADB-FLF addressable base or equal.”

284. Section 16721, Paragraph 2.03.D.5; DELETE the sentence “Model ATD-RL2F with Model ADB-FLF base or equal.”

285. Section 16721, Paragraph 2.03.D.6; DELETE the sentence “Model 501 or equal.”

286. Section 16721, Paragraph 2.03.D.7; DELETE the sentence “Model EPBMPB or equal.”

287. Section 16721, Paragraph 2.03.E.1; DELETE the phrase “Gamewell FCI Model SR or equal.”

288. Section 16721, Paragraph 2.03.E.2; DELETE the sentence “Gamewell FCI Model H12/24 or equal.”

289. Section 16721, Paragraph 2.03.E.3; DELETE the sentence “Gamewell FCI Model P2R or equal for unclassified areas and Model P2RK or equal for wet and corrosive areas.”

290. Section 16721, Paragraph 2.03.E.4; DELETE the sentences “Manufacturer shall be Federal Signal Corp., Model 27XST. Also provide Federal Signal Corp. synchronous strobe Model SSM for synchronizing a maximum of two strobe lights.

291. Section 16721, Paragraph 2.03.E.5; DELETE the sentence “Manufacturer shall be Commercial Products Group, Model FHEX.”

292. Section 16900, Paragraph 1.07.A; REPLACE the phrase “minimum 10 years” with the word “sufficient”

293. Section 16900, Paragraph 2.12.F; DELETE this paragraph in its entirety.

294. Section 16900, Paragraph 2.13.E; ADD the phrase “, General Signal,” after the phrase “Federal Signal Corp.”

295. Section 17100, Paragraph 2.01.B.3; DELETE the sentence “Manufacturer shall be Joslyn, Model 1669-01, or equal.”

296. Section 17100, Paragraph 2.01.B.4; DELETE the sentence “TVSS device shall be manufactured by M-System Co, Model MDP-24-1, or equal.”

297. Section 17100, Paragraph 1.04.A.4; ADD the phrase “, Data Station model CSMSTR,” before the words “or equal.”

298. Section 17100, Paragraph 1.08.A; DELETE this paragraph in its entirety. Section 17100, Paragraph 2.02.C.4; ADD the phrase “, or equal” after the words “ Intel, AMD, or Motorola,”

300. Section 17100, Paragraph 2.04.K.5; REPLACE this paragraph with the following:
“5. For discrete I/O, utilize single tier terminal blocks. For analog I/O, utilize double tier terminal blocks with ground foot.”

301. Section 17100, Paragraph 2.04.M.5; DELETE this paragraph in its entirety.

302. Section 17100, Paragraph 2.04.N.3; DELETE this paragraph in its entirety.

303. Section 17100, Paragraph 2.04.R, REPLACE the phrase “with one installed 1-gigabit SanDisk Type II compact flash card installed, or equal.” with the phrase “, Data Station model CSMSTR, or equal.”

304. Section 17100, Paragraph 2.06.B.2.b; ADD the phrase “, Liebert/Control Concepts,” before the phrase “or equal.”

305. Section 17100, Paragraph 2.07.A: REPLACE this paragraph in its entirety with the following:
“A. Characteristics
1. Provide a DIN-rail mounted UPS in each PLC enclosure. UPS shall provide a
transfer time that is indiscernible to the PLC and network equipment powered by the UPS. UPS shall include relay outputs for monitoring via the respective PLC for Loss of AC Power, UPS Problem/Fault, and ON UPS indication. Provide additional battery modules to afford a minimum 15 minutes of backup power on full load. UPS shall be Phoenix Contact QUINT series, Sola HD, or equal.”

306. Section 17100, Paragraph 2.07.B; DELETE this paragraph in its entirety.

307. Section 17300, Paragraph 2.01.A.1; REPLACE this paragraph with the following:
“1. Siemens HydroRanger200, Endress & Hauser FMU90, Pulsar Ultra 5, or equal.”

308. Section 17300, Paragraph 2.01.B.1; REPLACE this paragraph with the following:
“1. Siemens OCMIII, Endress & Hauser FMU90, Pulsar Ultra 5, or equal.”

309. Section 17300, Paragraph 2.02.I.1; REPLACE this paragraph with the following:
“1. Transducer Selection – Provide the manufacturer‟s recommended transducer best fit for each individual application.”

310. Section 17300, Paragraph 2.02.I.2; DELETE this paragraph in its entirety.

311. Section 17300, Paragraph 2.04.B.2; REPLACE this paragraph with the following:
“2. Provide Siemens, Model FMS-210 channel bracket mounting kits, custom-fabricated equivalents manufactured of aluminum, or equal.”

312. Section 17350, Paragraph 2.01.A; DELETE this paragraph in its entirety.

313. Section 17560, Paragraph 2.04.C; ADD the phrase “, APC Smart UPS,” before the phrase “or equal.”

314. Section 17560, Paragraph 2.06.B.5; DELETE this paragraph in its entirety.

315. Section 17650, Paragraph 2.01.A.2; REPLACE this paragraph with the following:
“2. Scott Health and Safety ”

316. Section 17650, Paragraph 2.01.A.3, ADD this paragraph as follows: “3. Or Equal”

 This communication is to be deemed evidence that the bidder has received this addendum and has followed the instructions outlined therein.

John Cannon
Engineer